可再分散性乳胶粉

Re-dispersible polymer powder

Product introduction

Re-dispersible polymer powder is the powder form of a special emulsion (macromolecul-ar polymers) after spraying and drying. It dissolves in water easily and quickly and forms emulsion, the same with the original emulsion. The membrane will form after the moisture is
evaporated; this kind of membrane possesses high flexibility, good climate resistance and high adhesive to various substrates.
The plant was designed and developed using our own technologies. We have constantly introduced international advanced technology to fill the domestic vacant products.

Product features

Grade	311C(H)	311C(L)	413V	517E	415V	619E	423V	4527VE
Major Component	VAC	VAC	VAC/VeoVa	VAC/E	VAC/VeoVa	VAC/E	VAC/VeoVa	VAC/VeoVa/E
Appearance	White powder,freely flow
Solid Content, /%	≥98.0	≥98.0	≥98.0	≥98.0	≥98.0	≥98.0	≥98.0	≥98.0
Ash, /%	10-14	8-12	8-12	8-12	9-11	9-11	≤12.0	≤12.0
Stacking Density, /(g·L-1)	300-500	300-500	400-600	400-600	400-600	400-600	400-500	400-500
Average Particle Diameter, /μm	<80	<80	85±15	85±15	85±15	85±15	80±20	80±20
Viscosity of 50% Water Solution, /(P·as)	30.0-70.0	≤10.0	0.5-2.0	0.5-2.0	2.0-5.0	1.0-2.0	-	-
pH	5-9	5-9	5-9	5-9	6-8	5-8	5-9	5-9
Lowest membrance-Forming temperature, /℃	10	10	-5	0	-5	0	5±2	5±2
Application Scope（Suggestion）	Non-cement based Dry-mixed mortar	Non-cement based Dry-mixed mortar	1.Ceramic tile cohering dose 2.Adhesive mortar to exterior walls for heat preservation 3.Interface dry powder 4.Gravity flow mortar and level ground material	1.Adhesive mortar to exterior walls for heat preservation and isolation 2.Soft putty for exterior walls of buildings 3.Flexibility-demanding cement based polymer mortar products	1.Waterproof Mortar 2.Facing Mortar	1.Waterproof Putty 2.Soft Putty	1.Gravity flow mortar and level ground material 2.Ceramic tile cohering dose 3.Interface dry powder	1.Ceramic tile cohering dose 2/Soft putty for exterior walls of buildings 3.Dry-mixed grout for Tiles 4.Flexibility-demanding cement based polymer mortar products
Packaging	Small Package: 25 kg per bags     Bulk Package : 500 kg per bulk bags.
Storage	In a cool, dry place and temperature belows 30℃.
Shelf life	180Days.They can continue to be used if the products beyond the warranty period are unbonded.
Safe Note	Wear protective glasses and rubber gloves When handling; Avoid the eyes from splattering. Avoid the skin from direct contact, and prohibit edible; If contacted with eyes, wash eyes with plenty of water or with water and soap. Get medical advice if symptoms occur. If contacted with skin, wash skin with plenty of water or with water and soap. Get medical advice if symptoms occur. If inhaled, remove to fresh air; keep the victim lying down and restful